Windows With Built in Blinds – Everything You Need to Know

What are Windows With Integrated Blinds?

Windows with integrated blinds refer to blinds that are fully integrated into the window unit, enclosed between the panes of glass. You may find this option with both double-pane windows as well as triple-pane window models. Triple pane models offer a slew of benefits including thermal protection, sound dampening, privacy protection, and a cleaner overall look. Integrated blinds for the triple window can be hidden when not in use and make for a very beautiful blind.

The cost of windows with built in blinds can greatly vary depending on the model. Windows with integrated blinds are typically more costly and more complex. If you’re considering these types of windows for your home you will need to consider the benefits and drawbacks of windows with built in integrated or triple panes blinds and choose the option with more benefits for your specific home. It’s always best to speak with a Windows Specialist so that they can further help with any questions you might have.

Benefits of Windows With Integrated Blinds?

 

1. Reduced maintenance

As the blinds are entirely encapsulated within the unit, the blinds are not exposed to as much dust, dirt, or wind, and frequently cleaning blinds is a thing of the past as they require far less cleaning and maintenance. Blinds built into windows can even be insulated with built-in window spans and insulated between the panes, which will eliminate most condensation issues.

 

2. Less risk of breakage

One of the primary benefits of blinds inside window frames is the reduced risk of breakage. Conventional blinds are fragile and often susceptible to damage, however, integrated blinds can only be accessed directly by opening the window and releasing the safety latches, opening the space between the glass panes where the blinds are encased.

 

3. Thermal protection

A high-performance window with internal blinds can achieve U-values as low as 0.64 – 0.60. The U-value is a measure of the quality of the unit as an insulator, referring to its energy efficiency. The lower this value, the better the insulation. Average double pane units have U-values between 1.2 and 3.7. Equally, some high-performance triple pane units offer excellent heat rejection and privacy, providing near blackout conditions.

 

4. Quiet & convenient

A triple pane window with blinds inside can achieve a sound protection value of 45-47 dB. They also avoid the annoyance of constantly tapping against the glass in a ventilated residence.

 

 

When To Choose Windows With Built-in Blinds?

 

Your Budget Determines Your Choice of Window Selection.

Windows with built in blinds offer higher convenience over traditional blinds, however fewer options as well. Colors and styles are limited, however, the most frequently purchased models can be found as options. Integrated blinds will increase the overall cost of the window unit, especially when adding optional motorized shades, remote control, or even smartphone application options, as are available with exclusive models. The windows with blinds inside cost vary and it’s always best to contact the supplier directly to get more accurate pricing.

 

Renovation Or New Construction.

Integrated blinds can be great for either renovation projects or new construction. These fully-encompassing units save space, are required for other design elements, and provide the convenience of privacy without having to install less attractive exterior traditional blinds. Whether you’re in the process of renovating your home or if it’s for a new construction phase, replacement windows with blinds inside the glass have many benefits. Regular blinds tend to accumulate dust and when you invest in replacement windows with built in blinds, you’re getting upgraded features that other blinds just don’t have.

 

Conclusion

If you’re considering purchasing window units with integrated blinds, take the time to evaluate triple pane energy efficient units with insulated glass for all of the added benefits. If the convenience, style, and wow factors included above are of value, the added cost may be the right decision for your renovation or new build project!

Whether it’s for your patio doors, sliding doors, or front doors, when you opt to get window blinds with well-sealed windows, you’re getting more from your home than simply an extra way to control the amount of light entering.

How to Measure Windows for Your New Construction Home

How to Measure Windows for Your New Construction Home

You must have your windows properly measured for your newly constructed home because it will give you an accurate measurement of your window frame, and ensures the proper windows fit in the existing window unit. There is a bit of space between the outside molding of the windows, which is often not obvious, so measuring to find the correct window width is necessary. If you recently purchased a new home and are on the market to have new construction windows installed, such as Tilt & Turn Windows, there are a few things you should know about the process so that you make an informed decision.

Window Measurements at the Initial Stage

When it comes to windows, it’s not a “one size fits all” situation, and because there are different window frames available such as UPVC Windows, UPVC Aluminum Windows, etc., your new window frame or replacement window frame requires the right measurements to ensure a proper fit. Whether it’s to install replacement windows for a renovation project or new windows for a home build plan, having the correct measurements will make the process go a lot smoother.

A window specialist will be able to measure windows more accurately, and if you want to save time and money then it is a good idea to take all the necessary steps to ensure you have all the proper measurements. When you leave it to the Window Specialists, you’re guaranteed to have accurate measurements every time, and your new windows will look beautiful!

Leave it to the Window Specialists

When measuring windows, it’s important to note that specific windows are made to measure by the millimeter and should only be measured by a window specialist. This is especially true if you have a new construction home, in which the sizes are taken directly from the plan. If you have a renovation in mind and are looking to get Premium European Windows Installed, some installers will go on-site to take the measurements, and they will remove 1/2 inch all around from the rough opening on windows and 1 inch all around for larger lift and slide doors.

The Importance of Professional Window Measurements

When you decide to purchase high-quality European windows for your newly constructed home, it’s always best to have a window specialist measure and install the windows. This is because they have all the necessary tools and expertise to get the job done efficiently. Professional measurements of your home’s windows ensure that the new ones you purchase will fit without any problems. Not only that, but it will also help ensure that they are installed correctly.

The most important thing about getting professional window measurements taken before you buy or install new windows is that it guarantees everything fits properly. If your old windows were installed incorrectly or if the measurements are incorrect, then they won’t be able to accommodate these new ones without major problems. In addition, if they aren’t measured by someone who knows what they’re doing, then there’s a chance that something could get broken during installation—which would mean even more money spent replacing whatever was damaged.

An Architect’s Guide on How to Choose Windows for New Construction

An Architect’s Guide on How to Choose Windows for New Construction

If you’re looking for an architect’s guide to windows, you’ve come to the right place! From Sash Windows, Double Hung Windows, to Hopper Windows, you will have a better understanding of the different types of windows and materials and will be able to choose the best windows for your newly constructed home!

Window Types and Technologies with its Operating Types

 

  1. European Tilt & Turn Window

    Tilt and turn windows are unique in the sense they open on two different axis. The window can be tilted open, usually from the top, allowing for excellent ventilation and airflow, even during rainfall. The window tilts open in this manner to maximize the efficiency of air circulation, bringing cool air towards the ceiling and pushing the warm air down, creating the circular air movement desired for clean fresh air flow. The window can also be opened fully on a side axis, which is most often used for cleaning the window’s exterior or for the ability to escape a room via the window in the case of an emergency. Tilt and turn style windows account for the majority of windows purchased in many European countries, however, this technology has yet to be adopted on a wide scale in North America.

  2. Fixed or Picture Window

    A Fixed Window is a non-operable unit, meaning it consists of a stationary window frame that can not be opened. A Picture Window is also a non-operable window however, in comparison, large picture windows usually have a lower profile frame, maximizing the glass surface to create clear, unobstructed views. Fixed Windows are often aligned with operable windows of the same style and size to create expansive and open views across a wide space and allow for ample natural light to enter the room. Non-operable windows can also be manufactured in larger sizes as the frame does not need to support heavy-duty hinge hardware that would permit thicker glass units to rotate and open.

  3. Sash Window

    • Single hung windowsA Single Hung Sash Window refers to a window unit in which there are two sashes, one is operable and the other is non-operable. The most common example of this type of unit is one in which the bottom half of the window can be unlatched and slid upward, in alignment with the upper non-operable sash to allow for airflow into the room.
    • Double hung windowsA Double Hung Window uses the same window design as a Single Hung Window, however, both the two sash units are operable. The most common example is a window that can be unlatched and the lower sash slid upward and the upper sash slid downward.
  4. Slider Window

    • Single Sliding WindowsSingle Slide Window units have two sash units, side-by-side, which open horizontally and consist of one operable sash and one non-operable sash.
    • Double Sliding WindowDouble Slide Window units have two sash units, side-by-side, which open horizontally and consist of two operable sashes.
  5. Casement Window

    Casement Windows are attached to their frame via one or more hinges and open using a crank mechanism. They can be opened to varying angles based on how many times the crank is turned.

  6. Awning Window

    Awning Windows are Casement Windows that are hinged at the top and swing open outward via the turning of a crank mechanism.

  7. Hopper Window

    A Hopper Window refers to a small horizontal window, usually installed in either the basement or in a bathroom, that opens from the top. The bottom of the window swings outward while the top of the window swings inward when opened.

     

Window Materials and Performance

  • UPVC Frames

UPVC is affordable, extremely durable, easy to care for, not affected by moisture, has a low conductivity, and is very flexible under high heat, permitting for unique shaping and design opportunities.

  • Aluminum Frames

Aluminum is lightweight, offers a high degree of stability, can be offered in a range of different surface treatments, and can provide narrow frames for expansive views.

  • Wood Frames

Wood frames are a frame material that offers natural beauty and a cozy feel. Wood is a less modern window material however it has low thermal conductivity and high strength. The concern with full wooden frames is longevity with the possibility of rot and deterioration over time.

  • Hybrid Frames

Hybrid frames such as UPVC – Aluminum or Wood – Aluminum are becoming more common in parts of the world as they combine the strengths of different materials to provide a combination of performance and esthetic pleasure. An example would be an Aluminum – Wood window frame with aluminum on the exterior of the home, providing excellent resistance to weather and water elements, with a beautiful wood frame on the interior that perfectly matches the flooring or furniture of the room in which it is contained. As with any of the above materials, the most important factor is the window systems design of the window unit itself. There are low-performing and high-performing windows of the 4 materials listed above for which the number of glass panes, the thickness of the glass, the composition of the frame extrusion, air seal tightness, and, other factors will ultimately determine the quality of the unit itself.

Aesthetics – Components of a Beautiful Window

 

  • Color / Texture

The world’s top window manufacturers are capable of creating vast scales of color options based on the material composition of the frame. For example, UPVC can be wrapped in a “foil” that can almost literally be any color or grain texture desired. There are obvious limitations and manufacturers have their standard series of options, however, the technology permits near limitless variety. Aluminum can also be powder coated via an electrostatic charge process that adheres to the surface providing a wide range of color options, based on the powder selected, and this process even improves the durability of the aluminum frame creating an external barrier between the elements and the aluminum surface.

  • Wood Grain

For wood enthusiasts, there is likely nothing more appealing than a wood frame window. Whether the frame is made of spruce, oak, ash, walnut, larch, or other varieties, you can match the color to the interior décor elements for a design that stands out. The wood can be stained to a variety of different hues to hit exactly the color note desired. For some, who appreciate the texture of wood but would prefer something other than the natural grain pattern to show through, wood frames can be painted in many colors, the most popular being white, cream, or black.

  • Opacity

Another aspect rarely considered during the window selection process is the style of glass within the unit. Glass can be manufactured in a variety of different hues, and opacities and can have varying functional performance such as anti-glare to prevent interior glare from happening, and you can even get an insulated glass unit with improved thermal insulation, shatterproof lamination, etc. Not all manufacturers offer these different features and they usually come at an added cost, however, the glass itself can be curated to fit your exact needs via certain suppliers.

Energy Efficiency

  • Thermal Transmittance (U-value):

    The U-value, also known as thermal transmittance, is the rate of transfer of heat through a structure divided by the difference in temperature across that structure, often expressed in the units of measurement W/m2K. In simplistic terms, the lower the U-value on a window unit, the better that window is at restricting heat exchange between the exterior and interior of your home, reducing the energy required to both heat and cool your residence. When comparing window options, look for the lowest U-value possible!

  • Visual Light Transmittance (VLT):

    VLT is a percentage-based expression that provides a measure of how much visible light passes through the glass and into your home. Now for many, a high amount of light penetrating your home is a good thing as it brightens the space and makes it feel more open, however, that high transfer rate is usually accompanied by a high solar heat gain coefficient which can drastically reduce the energy efficiency and comfort of your home. Have you ever had to move away from a window during the summer because it was simply too hot? This was likely due to a high VLT rating. Unlike with U-values, there is not a simple “good or bad”, however, there are glass technologies such as special coatings that have less solar heat without overly restricting the amount of visible light into your home.

Conclusion: Benefits of Choosing the European Window for your Home

European Tilt & Turn Windows are not only beautiful windows, but they also offer the most advanced window technology and functionality available. If you require an operable window, it is highly likely a tilt and turns solution will provide the ventilation and emergency evacuation needs you require. Also, turn limiters can be added to these units to prevent the window from being opened past a certain radial degree, which is ideal for concerns with small children. With all of its benefits and features, European Tilt & Turn Windows are an excellent choice for your home!

Security – Four-sided interlocking operable window units are without a doubt one of the most secure additions to your home. Most residential window units have one or two latch points that secure an operable sash to the frame, whereas a four-sided interlocking unit has at least 8 latching points distributed throughout the entirety of the frame itself and are entirely self-contained and invisible when the unit is closed.

High Energy Efficiency – For the highest levels of energy efficiency for your home, you should consider triple-pane window panes with U-values below 1.0 W/m2K. The top market performers can achieve U-values in the 0.60 W/m2K range and these units are available for the supplier to the average consumer base.

Longevity – The duration of your window frames will vary on climate, weather conditions, regular maintenance, and material composition, however, you can create optimal conditions for your environment with sturdy, heavy, triple-pane windows with metal hardware such as is available on certain European triple-pane products.